This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This flush-mounted housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers/bunks without damage.
An 8-pin 1 kW transducer, it has a depth of 1,200 to 1,800 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 22×20 or 6×6 degrees; and mounts on a 16 to 24 degree deadrise angle.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*Do not use on metal hulls. When using with a 6-pin Garmin sounder, a transducer adapter cable is required.
|Maximum depth||1,200-1,800 ft.|
|Depth/speed/temperature||Depth and Temperature|
|Number of pins||8-pin|
|Cable length||39 ft.|
|Supported deadrise/transom angles||16°-24° degree deadrise|